Technological development of aeration pipes for aquatic aerators

Seasonal climate change affects dissolved oxygen in the water body is also closely related to the season and climate, especially in summer and autumn, the water temperature is higher, and the amount of bait is increased. In addition, weak light intensity during the rainy season and poor photosynthesis of aquatic plants can easily cause water hypoxia.5 kW and 3 kW.

When the pond area is more than 10 acres, one can be installed at each end of the fish pond. Sufficient dissolved oxygen enables the water bodies to establish a natural ecosystem and make water alive. The impeller type aquatic product aerator has two specifications, 1. Yes, sufficient microporous aeration and oxygenation can transform it into microorganisms dissolved and decomposed organic matter, restore the self-purification function of the water body, realize ecological breeding, ensure breeding benefits and ultra-low energy consumption can greatly save farmers' electricity costs.

The metabolism of microorganisms and aquaculture aerators plankton in the water and bottom mud is inhibited due to hypoxia, resulting in a very low level of dissolved oxygen in the bottom. The 1. It is worth mentioning that the self-purification work of the water body is restored by rotating the impeller to stir the water body, and the fresh air in the atmosphere is merged into the water, thereby achieving the purpose of aeration; at the same time, the rotating impeller presses the upper layer of water to the lower layer, which not only delivers fresh air, The waste gas at the bottom of the pond is discharged; when the weather is hot, the temperature difference between the upper and lower water layers is large, and stirring the water body can balance the water temperature.5 kW aquatic aerator can be used for fish ponds under 5 mu, and the 3 kW aquatic aerator for fish ponds over 5 acres.

Technological development of aeration pipes for aquatic aerators: Of course, the first thing to say is high-efficiency dissolved oxygen and activating water bodies. The development of aeration tube technology makes the use of aquatic aerators more obvious. After the aquatic product aerator is installed, the gear box should be filled with gear oil as required. Due to the accumulation of fish excrement and residual bait, the dissolved oxygen in the lower water body is very low

What kind of problems should you pay attention to when you need to buy aquatic aerators?

I hope you can treat all kinds of equipment problems rationally and make good use of it. There are many reasons for the insufficient flow of Roots blower. At this time, stop measuring the gap and take Corrective measures. In daily work, pay attention to the temperature, vibration and running sound of the bearing and check it frequently. During operation, special attention should be paid to whether there is friction or inhalation of foreign matter between the impeller and the casing, the impeller and the wall, the impeller and the impeller, should be checked frequently and early It is found that when the friction is severe, the local temperature rise of the casing will be too high, and the surface spray paint will be burnt.

What kind of problems should you pay attention to when you need to buy aquatic aerators? One problem is to choose a reliable type. Try to choose some equipment that can reliably reduce noise.  You need to choose the right type according to your actual needs. In fact, you don’t have to worry too much, because the problem of insufficient traffic can be solved as long as you understand the cause. The daily maintenance of the Roots blower for aquatic products aerator: What I will introduce to you today is how to deal with insufficient flow in the Roots blower work project.. The first one is the insufficient inlet discharge pressure of the equipment. At this time, you should stop immediately. According to market surveys, it can be found that there are many types of aerators for fish ponds today, and everyone cannot blindly choose to buy them according to the industry demand flow. There are many problems to pay attention to when buying aeration fans, and we must also pay attention to noise problems.

In cold areas in winter, after the Roots blower that needs cooling water is stopped, the cooling water must be discharged to prevent the water from freezing and damaging the machine., it may cause insufficient flow. I hope you can analyze specific issues and deal with them. Therefore, it is recommended that you review the advanced nature of the equipment's noise-absorbing parts and see the user's evaluation of this equipment noise problem. The effective way to solve the problem is to check the import or export, and clear the obstacles in time to keep the import and export smooth.Aquatic aerators are used in many occasions, but sometimes people will encounter some malfunctions. In addition to the above, if the belt tension of the equipment is too small or slipping, when the equipment pipeline has problems, such as rust, etc. So what should I do if the flow rate is insufficient in the Roots blower work project? What is the reason?

In fact, there are many reasons for the insufficient flow rate of the Roots blower. The reason for the insufficient flow of the Roots blower may also be the wear of the impeller, resulting in insufficient clearance and insufficient pressure removal. During long-term operation, due to the corrosion of the impeller and the casing, the working gap increases, the leakage inside the Roots blower increases, the casing temperature rises, the exhaust temperature increases, and the fan flow rate decreases. At this time, many people are at a loss. Thank you for your reading and support, and I wish everyone a happy mood every day. In this case, professional maintenance personnel are required to replace the impeller.

The second point is that you need to choose the right model. Because if you choose unreliable equipment, noise pollution will occur during use. Then everyone needs to analyze these faults reasonably and solve them in time. If the choice is wrong then the equipment you Diesel Aerators Factory purchased may not be applicable. So how to adjust? This requires everyone to adjust the pressure so that the pressure returns to the specified value range of the equipment. It is only for your reference. The aquatic aerator tells that there is another situation that may cause insufficient pressure, that is, serious obstruction caused by foreign matter at the inlet or outlet of the fan. In use, you may find that the flow rate of the Roots blower is insufficient