Seasonal climate change affects dissolved oxygen in the water body is also closely related to the season and climate, especially in summer and autumn, the water temperature is higher, and the amount of bait is increased. In addition, weak light intensity during the rainy season and poor photosynthesis of aquatic plants can easily cause water hypoxia.5 kW and 3 kW.

When the pond area is more than 10 acres, one can be installed at each end of the fish pond. Sufficient dissolved oxygen enables the water bodies to establish a natural ecosystem and make water alive. The impeller type aquatic product aerator has two specifications, 1. Yes, sufficient microporous aeration and oxygenation can transform it into microorganisms dissolved and decomposed organic matter, restore the self-purification function of the water body, realize ecological breeding, ensure breeding benefits and ultra-low energy consumption can greatly save farmers' electricity costs.

The metabolism of microorganisms and aquaculture aerators plankton in the water and bottom mud is inhibited due to hypoxia, resulting in a very low level of dissolved oxygen in the bottom. The 1. It is worth mentioning that the self-purification work of the water body is restored by rotating the impeller to stir the water body, and the fresh air in the atmosphere is merged into the water, thereby achieving the purpose of aeration; at the same time, the rotating impeller presses the upper layer of water to the lower layer, which not only delivers fresh air, The waste gas at the bottom of the pond is discharged; when the weather is hot, the temperature difference between the upper and lower water layers is large, and stirring the water body can balance the water temperature.5 kW aquatic aerator can be used for fish ponds under 5 mu, and the 3 kW aquatic aerator for fish ponds over 5 acres.

Technological development of aeration pipes for aquatic aerators: Of course, the first thing to say is high-efficiency dissolved oxygen and activating water bodies. The development of aeration tube technology makes the use of aquatic aerators more obvious. After the aquatic product aerator is installed, the gear box should be filled with gear oil as required. Due to the accumulation of fish excrement and residual bait, the dissolved oxygen in the lower water body is very low

Megosztás a facebookon

The above information about aerators is here for everyone..In order to ensure the service life of the aerator, there are many problems that need our attention in our daily use, because only in this way can we guarantee its service life.

When the aerator is turned on, we must watch the weather to ensure it is sunny. It does not turn on after sunrise in the morning, in the evening, or during the day on rainy days. If the sun is strong and the temperature is high during the day, and there is a sudden thunderstorm in the evening, turn on the fish pond aerators early and more. Starting at 9-10 am, it can not only add oxygen to the water, but also promote pool water exchange, use the photosynthesis of phytoplankton, and increase the amount of dissolved oxygen in the pool water.

The most important thing is to store a large amount of oxygen to ensure night needs. Turning on before dawn can increase and restore the dissolved oxygen in the water. Turn on in the afternoon, turn on the next morning when it is cloudy, turn on in the middle of the night when it rains, and turn on in the middle of the night when it rains. Thank you for reading. It starts at 3-5 pm, and can directly supplement oxygen to meet the needs.

It is also very important to turn on by the time. Finally, I remind everyone that due to the many types of aerators, correct maintenance and use will extend the life of the aerator itself, especially guarantee Personal life safety is extremely important. For Feishuitang in summer, it is best to turn on the aerator at 1-2 o'clock in the middle of the night, until the sun comes out at 7-8 o'clock the next morning, the phytoplankton shrimp farming aerator suppliers will produce oxygen through photosynthesis, and the fish will not be shut down until they do not float

Megosztás a facebookon

The microporous aeration adopts the bottom aeration aeration method. Oxygenation in the micropores causes the water to rotate and flow up and down, bringing harmful gases out of the water, improving the water quality of the pond and reducing diseases The occurrence of the occurrence of water in the pond has sufficient dissolved oxygen, which ensures the relative stability of the pond water quality, improves the utilization rate of feed, promotes the growth of fish, and improves the survival rate, specifications and yield of aquaculture. The above is the introduction of the microporous aeration technology of the aeration fan.

The aeration area is wide and the dissolved oxygen distribution is uniform, which increases the bottom dissolved oxygen. When working, the micro holes of the aeration tube will automatically open under air pressure.Let me introduce the microporous aeration technology of the aeration fan. The microporous aeration technology is the pond pipeline microporous aeration technology, also known as nano aeration technology. Microporous aeration is also energy-saving, With the advantages of low noise and safety, under the same main engine power, the aeration capacity of the microporous aerator is three times that of pond aerator Suppliers the impeller aerator.

The membrane tube type microporous aerator adopts imported EPDM material, with tiny white closed pores on the membrane. It has good chemical stability, no plasticizer, long-term elasticity, acid and alkali resistance, no hardening, no embrittlement, long service life without aging. Accelerate the oxidation of ammonia nitrogen, nitrite and hydrogen sulfide at the bottom, and keep the growth of harmful microorganisms at the bottom.

The aeration work components are mainly composed of valves, ventilation pipes and membrane-tube type microporous aerators. The bubble diameter of the product is small and the gas distribution is uniform, which can not only maintain a high oxygen conversion rate, but also achieve the effect of mixing and stirring. Air enters the pool for oxygenation; if the pressure disappears, the micropores of the aeration tube will automatically close to prevent water from flowing back into the micropores

Megosztás a facebookon

For Wubing Pond, only mechanical oxygenation and medical emergency can be used. Strong oxygen water purifier is a good chemical oxidizer commonly used at present, and other commonly used chemical oxidizers include calcium peroxide, sodium perborate, sodium percarbonate, hydrogen peroxide, etc. Black ice can easily lead to hypoxia in aquaculture waters, and accidents of dead fish due to hypoxia occur from time to time, posing a huge threat to the safe overwintering of fisheries. However, due to the high cost, it can only be used for rescue.

There are unmelted snowflakes floating on it.Aquatic aerator tells that when freezing rain and snow weather comes, it is necessary to do the following work to prevent the occurrence of water mold: strengthen the cold and warmth of fish, anti-freeze and anti-injury work, and strengthen the cold-proof shelter at the upper wind of the overwintering fish pond Other facilities or scatter straw in the pond to prevent the convection between the water and the water and prevent the water temperature from falling sharply; strengthen the autumn cultivation of fish and feed high-quality feed to enhance the physique of the overwintering fish and enhance the disease resistance of the fish; pay close attention to the overwintering

If there is any leakage in the pool, if the ice surface is found to be collapsed, water should be refilled in time; always measure the dissolved oxygen, pay attention to the change of dissolved oxygen in the automatic fish feeder Supplies water body of the wintering pool, you can measure once every 5 to 7 days, and once every 1 to 2 days before and after the Spring Festival. When using mechanical oxygenation, it should be noted that the time should not be too long and the amount of water conduction should not be too large, so as to prevent fish's stress response as much as possible.

The so-called black ice refers to the snowy weather in the early winter when the water body is not frozen. The manufacturer of aquatic aerators tells that mechanical aerators can be used for aeration by impeller-type aerators, circulating water inside ponds for aeration, drawing river water and large surface water for replenishment and aeration, and taking adjacent pond water with high oxygen content for replenishment and oxygenation

Megosztás a facebookon

Experiments have shown that temperature affects the speed at which fish eat. In the work of aquaculture, it is necessary to choose aquaculture feeder according to the breeding method. The economic benefits that can only be obtained by scientific fish farming. Aquaculture aerators are mainly used in fish farming. Thank you for reading. Aquatic aerators briefly describe the precautions for the use of aquaculture feeders. Pond feeding machine, a kind of feeding machine used in aquaculture.

Choose flexible feeding, special circumstances can increase the feeding time. The position of the feeder must face the open surface of the pond. That's all for today's introduction. According to the size of the pond, the power of the motor, the conveying distance, the kilograms of feed and the conveying area of ​​the throwing area are determined to be different, which can largely avoid the waste of fish food and feed. Reasonable use of aerators can effectively increase the amount of dissolved oxygen in the pond water, accelerate the material circulation of the pond water body, eliminate harmful substances, and promote the reproduction of plankton. Regarding how to choose a suitable feeder for aquaculture.

Due to the different water speeds in different areas, it may cause strong fish feed and affect normal feeding. The correct use of feeders in aquaculture can save a lot of feed compared to artificial feeding. The deep-water cage feeder directly delivers the feed to the cage several meters below. It is recommended to place it at a high position in the pond. Pay attention to the working hours of the feeder: it is usually used at intervals and cannot be turned on for a long time. If you have any questions, please call us for consultation. It is necessary to ensure that there are regular fish that can open the food.

The operation of the feeder needs to be determined according to the temperature of the water. With the development of fishery, related application China Deep Water Jet Aerator equipment is continuously improved and more and more practical. It directly affects the use effect of the aerator.Aquatic aerators are more and more widely used in the aquaculture industry. The following is an introduction to everyone: cage feeder, which is divided into water cage feeder and deepwater cage bait machine according to the usage. will introduce relevant knowledge to you today, hoping to help get home. I suggest you refer to them:  However, many fish farmers lack science in using pond aerators

Megosztás a facebookon

I hope you can treat all kinds of equipment problems rationally and make good use of it. There are many reasons for the insufficient flow of Roots blower. At this time, stop measuring the gap and take Corrective measures. In daily work, pay attention to the temperature, vibration and running sound of the bearing and check it frequently. During operation, special attention should be paid to whether there is friction or inhalation of foreign matter between the impeller and the casing, the impeller and the wall, the impeller and the impeller, should be checked frequently and early It is found that when the friction is severe, the local temperature rise of the casing will be too high, and the surface spray paint will be burnt.

What kind of problems should you pay attention to when you need to buy aquatic aerators? One problem is to choose a reliable type. Try to choose some equipment that can reliably reduce noise.  You need to choose the right type according to your actual needs. In fact, you don’t have to worry too much, because the problem of insufficient traffic can be solved as long as you understand the cause. The daily maintenance of the Roots blower for aquatic products aerator: What I will introduce to you today is how to deal with insufficient flow in the Roots blower work project.. The first one is the insufficient inlet discharge pressure of the equipment. At this time, you should stop immediately. According to market surveys, it can be found that there are many types of aerators for fish ponds today, and everyone cannot blindly choose to buy them according to the industry demand flow. There are many problems to pay attention to when buying aeration fans, and we must also pay attention to noise problems.

In cold areas in winter, after the Roots blower that needs cooling water is stopped, the cooling water must be discharged to prevent the water from freezing and damaging the machine., it may cause insufficient flow. I hope you can analyze specific issues and deal with them. Therefore, it is recommended that you review the advanced nature of the equipment's noise-absorbing parts and see the user's evaluation of this equipment noise problem. The effective way to solve the problem is to check the import or export, and clear the obstacles in time to keep the import and export smooth.Aquatic aerators are used in many occasions, but sometimes people will encounter some malfunctions. In addition to the above, if the belt tension of the equipment is too small or slipping, when the equipment pipeline has problems, such as rust, etc. So what should I do if the flow rate is insufficient in the Roots blower work project? What is the reason?

In fact, there are many reasons for the insufficient flow rate of the Roots blower. The reason for the insufficient flow of the Roots blower may also be the wear of the impeller, resulting in insufficient clearance and insufficient pressure removal. During long-term operation, due to the corrosion of the impeller and the casing, the working gap increases, the leakage inside the Roots blower increases, the casing temperature rises, the exhaust temperature increases, and the fan flow rate decreases. At this time, many people are at a loss. Thank you for your reading and support, and I wish everyone a happy mood every day. In this case, professional maintenance personnel are required to replace the impeller.

The second point is that you need to choose the right model. Because if you choose unreliable equipment, noise pollution will occur during use. Then everyone needs to analyze these faults reasonably and solve them in time. If the choice is wrong then the equipment you Diesel Aerators Factory purchased may not be applicable. So how to adjust? This requires everyone to adjust the pressure so that the pressure returns to the specified value range of the equipment. It is only for your reference. The aquatic aerator tells that there is another situation that may cause insufficient pressure, that is, serious obstruction caused by foreign matter at the inlet or outlet of the fan. In use, you may find that the flow rate of the Roots blower is insufficient

Megosztás a facebookon